With the passage of time, there has been continuous development in the world of solar energy, nuclear power, smart grid, electric vehicles, rail transportation, aerospace, aviation, and navigation. Therefore, this trend has increased requirements for power equipment performance. These days, the first generation of silicon materials is about to hit the theoretical limit that was originally determined. The third generation features a wider bandwidth, electron saturation, and thermal conductivity. In this article, we are going to talk about a new type of material called silicon carbide ceramics. And we will specifically discuss the applications of silicon carbide ceramics in different industries. Read on to find out more.

As far as potential is concerned, silicon carbide ceramic is the most mature choice. As a matter of fact, many of its indicators are much better than silicon. For example, it has a 300% higher bandwidth. Apart from this, the theoretical operational temperature of this material is 600 Celsius. Now, let’s talk about the different uses of this material.

Electric Vehicles

Since these modules can have a sustainable, intelligent, low carbon, and green development, we can say that the advantages of this material are primarily reflected in the following three aspects.

1. Simplification of the power supply Network and boosting the frequency

2. Increasing the temperature and reducing losses

3. Improving efficiency and reducing the volume

As far as power conversion is concerned, components made of silicon carbide cal can help improve performance. In electric models, the active load-bearing component is the electric motor. These motors have different rotational speeds. Therefore, these motors require repeated acceleration and acceleration during the process of driving. Therefore, the working condition is more complex compared to the speed regulating system.

Transmission Systems

If you have a silicon-based device, your best choice is are switch made from silicon carbide. This is because this material has an extremely low resistance. Therefore, it is an ideal choice for applications where high frequency and temperature are involved.

The thing is that this material can reduce the loss of power by up to five hundred percent. Moreover, it is possible to reduce weight and size by over 40%. Therefore, it can help have a positive impact on the grid configuration and adjustment of energy strategy.

Solar Energy Field

If you are looking for advice that can be used in solar inverters, silicon carbide is an ideal choice. It comes with a small size, reduced costs, and much higher efficiency. Typically, the conversion efficiency of these inverters is around 96%. But if silicon carbide is used, it is possible to increase the efficiency to 97.5%. In other words, these devices can help produce power losses by 25%. Apart from this, these inverters can help boost conversion efficiency significantly.

LED Lighting

These days, the popularity of LED devices that use silicon carbide is on the rise. The thing is that these LEDs are much brighter and can reduce the cost by up to 50%. They are 200% brighter than other types of lights.

Similarly, they have 10 times more thermal conductivity. In routine life, you can apply this type of lighting for different types of environments, such as color display devices, information screens, indoor lighting, and signal lights. The thing is that they can help reduce pollution and cost.

I used to work with Tom. Tom was promoted as our business development manager in charge of expanding our business in Africa. Tom had only operated in western countries and he was at ease with the western culture and its customs. For his first international business trip, he was sent to Nigeria to meet our current clients and new prospects. As we all know business development is not about selling but rather about building relationships to consequently offer services to fulfil the needs of your clients. Tom’s first business lunch was with Franklin, the managing director of an international oil and gas firm. Franklin was used to working with Phil as our company representative, and this lunch was an opportunity to pass over the management of Franklin’s account. It is customary with some countries to give to your client a traditional gift from your country, such as chocolate from Harrods or Scottish shortbread; anything that represents the British culture. These little details show that you care about the foundation of long-term business relationships. Unaware of this custom, Tom didn’t bring anything to the lunch. To show his discontent, Franklin used Tom’s business as a toothpick. This was so embarrassing. The business relationship was damaged and it took a while to reposition it back to where it was previously.I have travelled across the world during my international career. I studied cross cultural differences with fascination and I learned a great deal through my business experience. I have seen managers failing to sign deals just based on their lack of cultural awareness. In my previous business article, I taught the importance of personal branding. In this article, I will reveal to you a few tips you need to know to break challenging markets such as Asia.1 – Dress for BusinessProfessionalism begins with your brand persona. So always dress professionally to make a positive impact and satisfactory business impression. Acknowledging cultural differences whilst looking and acting prepared will always be received positively and will help you seal the deal.Take the time to study the cultural norms of the country that you are doing business in, and find out how they dress. A particular flower for example, may be acceptable in your country, but in another country, it could be used for mourning which would be totally unacceptable in a business situation. Attention to detail is essential and will help you to avoid causing any upset.2 – TimePunctuality is also valued differently, so be aware that some cultures are more time conscious than others. In South America and Africa, scheduled appointments are considered as a time guideline rather than something they need to stick by. In Europe, they are always punctual and being late is perceived as unprofessional. Take this into consideration and consequently allow your schedule some time flexibility.3 – GreetingIn western countries, a hand shake is the commonly accepted form of greeting. In Saudi Arabia, women should wait for a man to offer his hand first. If she offers her hand first, he may not shake it. So save yourself the embarrassment. In Japan, people bow to greet each other. In Italy and Egypt, don’t be surprised if your client or partner offers a kiss on the cheek. The best way to start on a good note is to offer a traditional present from your country. This is not bribery but rather a good gesture. However in Asia, this might be perceived as bribery and they are quiet likely to refuse your present. Always address and greet your business partners or your clients by their last names and titles unless you are invited to do otherwise.4 – CommunicationBusiness people in different countries communicate differently. In Nigeria or Germany, people tend to speak loudly when sharing ideas. In Ghana or Japan, they speak softly and don’t interrupt each other. Don’t forget to watch your body language when interacting as it could be distracting in countries that are not accommodated to so much body movements to emphasise an idea.To conclude, always do your research when working in business and in markets that you are not familiar with. Ask advice from colleagues who have experienced working with certain countries. Their knowledge and experience are great values for your own success. Observe and adjust to the ways that your clients or business partners communicate. The more information you know, the more you are in control and capable of signing the deal.

A worker shortage might be excellent news for the economy! Maybe, just maybe, firms will awake and see workers’ substantial contribution to their success. Some CEOs take unconscionable sums and destroy their firm’s value, unlike many frontline workers who create value. During the pandemic, CEOs took vast sums as they laid-off workers. Some firms sought bankruptcy protection, but hat didn’t stop their greedy CEOs from snatching hefty bonuses.

We have a worker shortage and firms are scrambling to hire whomever is willing. Some firms, like McDonalds have paid signing bonuses. Canada’s Loblaw and its competitors paid a bonus to frontline workers when the pandemic began. They stopped it after three months in unison with their competitors. When government confronted them about this collusion, they claimed it happened independently. Go figure! It’s like you caught your three-year-old with her hand in the cookie jar and she said, Mom, “Cookie Monster did it!”

Worker Shortage Inevitable With Shoddy Treatment

Loblaw’s behavior disturbs me. During the bonus period, profits soared. Per se, that’s no problem. I favor firms making profits. To be sure, I am against government taxing profits. But paying workers the bonus during the pandemic shouldn’t hinge on profits. It was just right. Meanwhile, my wife and I shopped at a Loblaw store and workers continued their excellent service despite Loblaw’s slight.

Leaders must realize frontline workers are the firm’s foundation and treat them well, not as cogs turning out CEOs bonuses! When employers treat workers like machines, they disengage. Gallup said, over several decades, they and other researchers found a strong link between employees’ workplace engagement and the company’s overall performance. Yet employers refuse to accept this. But there is good news: surveys show some firms break the mold and treat workers with respect: Cisco, Apple, Accenture, IBM, FedEx are a few.

Next Quarter’s Earnings Drives Businesses

Companies see next quarter as the prize, so they exploit workers and fudge next quarter’s numbers. I repeat: I am against government taxing business. However, I favor the Biden Build Back Better provision to tax share buybacks that the House passed, and it is before the Senate, even if it might have only a modest effect on share buybacks. Companies shouldn’t be spending billions buying back shares while exploiting workers.

Firms should present to shareholder meetings options to use buyback funds. Choices might include effects of paying bonuses to frontline workers with buyback funds. Shareholders should hear about potential strategic investments, too. Another option is stopping buy-backs for five years after layoffs. Executives, too, shouldn’t get bonuses within five years of layoffs. We must get rid of worker exploitation that enhances CEO bonuses.